Parts for Sale
Timestamp: 7/24/2008 8:18:26 AM
ID: 70
desc: T-15 Jeep trans c/w adapter & bell housing to bolt to small block chevy -$150.00 Edelbrock Victor Jr. High port intake for SM chevy- $100.00 CompCam Roller Rockers for SM Chevy -$50.00 B&M Rachet Shifter - $50.00 Headman headers for 350 into S10 conversion - $100.00 Canopy for Longbox small p/up (was on a Sonoma)- $50.00 "In a Heartbeat" full competition race vehicle- Must Sell!! $2500.00 rolling Cassis- Turn Key avail. All Prices OBO
price: as above
contact: Jennifer Crouch
method: inaheart.beat@shaw.ca
Timestamp: 7/22/2008 11:11:52 PM
ID: 69
desc: mVZBge <a href="http://izisfwykuyfc.com/">izisfwykuyfc</a>, [url=http://hnraloutmnjn.com/]hnraloutmnjn[/url], [link=http://mpjunilrtddd.com/]mpjunilrtddd[/link], http://wolxymlwdxcz.com/
price: Price
contact: Contact Name
method: Email or Phone #
Timestamp: 6/25/2008 8:56:08 AM
ID: 64
desc: "IN A HEARTBEAT" HONDA CIVIC Rolling Cassis. 1979 honda narrowed honda civic body, on 75 CJ5 jeep chassis. 33" cut superswampers on stock jeep rims. race proven 4 link suspension, turbo 400 trans, dana 44 front and rear housings, 373/ 410 gears T15 transfercase, still have original 3 speed tranny too! I just want to see it race again! Open to offers, great starter race vehicle, drop in an engine & its race ready!!! you can see pics on this website. Turn Key Available.
price: 2700.00 OBO
contact: Richard Crouch
method: phone-604-855-9783 or email: inaheart.beat@shaw.ca
Timestamp: 6/20/2008 10:35:43 PM
ID: 63
desc: Description 1976 gmc p/u. Rebuilt 350 small block with Edelbrock intake. Automatic transmission and 203 part time transfer case. 38.5" TSL Boggers on eagle alloy rims with warn premium hubs. All new fenders, fender flares, doors, and box with a beautiful viper blue metallic paint job. 6" suspension/ 3" body lift with shimmed up differentials and drop kit for T/C for better driveshaft angle. Interior is in decent shape with a new rubber floor. Nice little stereo system: pioneer deck with two 10" subs in a custom box and amp. This truck has been my summer toy for the past seven years and has been a lot of fun and the truck gets lots of attention. I am moving soon and need to sell ASAP. There is almost 20K invested and was asking $10,500.00 Price drastically reduced to $6500.00 o.b.o. for quick sale. Call (604) 859-5321 for more info or pics.
price: Price6500.00 o.b.o.
contact: Contact Name mike
method: Email or Phone # (604) 859-5321
Timestamp: 6/20/2008 12:08:25 PM
ID: 62
desc: "Flash Gordon" Tube frame chassis - 76 Datsun pick-up body - 2500 lbs total weight - 148" wheel base - 4.11 gears posi Front & Rear - 40" cut swamper Boggers - Aluminum centerlines - 1964 Ford 427 cu.in. (400 plus horse power) - 429 crank making effectively 460 cu.in. - Dual Holley 600 carborators - cheater nitros system (150 horse power) - M.S.D. - 11:1 compression - Lehmans Rods - Forged Pistons - stainless valves -- (includes spare parts, spare axles, heads etc)
price: $7500.00
contact: Gordon von Doelln
method: gordvondoelln@hotmail.com or call 604-856-2581
Timestamp: 6/13/2008 10:20:35 PM
ID: 61
desc: Description Intestinal Forditude. '79 F 250 frame stretched, shortened, 1/2 ton coil front 44, 3 link Dana 60 rear,4:88,4:10. Mustang rack and pinion. New paint and sheet metal just completed. 466BBF, dove heads done with scj valves and all other goodies, ported and polished. Big cam, KB hyperuetectic slugs, double roller, holley 800 drag carb (has also been modified),Wieand stealth intake, divider cut and carb spaced. Aluminum fuel cell with Carter black pump.MSD 6al, timing control, MSD blaster. 4000 flash stall converter by Island Torque Converters, freshened c6 with B&M shift kit, in cab cooler and remote filter. Hurst ratchet shifter. Single Driveline brake on NP 205 transfer case output.37" cut boggers on rear in ex condition,38" swampers on front, still working for me. Truck comes with spares and lit on aftermarket parts, may sell with trailer and service box. This truck is a reasonably well built machine, no junk,and a consistant winner in stock modified class in Quesnel and comp class in Moricetown, fastest run mid 5's.Engine should be in the neighborhood of 550 hp, however these pistons will not take nitrous, so don't get any crazy ideas. Lots of other tricks and details in build, was built to be fun and dependable.
price: Price$8000
contact: Contact Name Kevin
method: Email or Phone #250 632 4654 Kitimat BC
Timestamp: 6/3/2008 3:48:37 PM
ID: 60
desc: WANTED: Set of 4 Boggers, 35 or 36 inch for 16 inch 8 bolt chev rims.
price:
contact: Bob
method: karinbob@telus.net
Timestamp: 5/17/2008 1:20:47 PM
ID: 59
desc: Description : Turn key mud racer , narrowed 88 iroc body with fiberglass front clip (IROC'N'ROLL)motor is .030 over 454 rectangular port heads fully worked, roller rockers, 7/16 push rods,Team G intake,850 DB, 450HP NOS annular discharge fogger system, connecting rods fully worked, balanced, 10" high stall fully prepped, turbo 400, stage 3 shift kit, drive line brake, chain drive, ford 9" 4.88 gears ladder bar suspension with 33 spline axles, dana 44 with rack and pinion and three link up front, cut 35" TSL boggers,lots of trick stuff, all on a 18' trailer with surge brakes.
price: Price : 8,000.00
contact: Contact Name : Bruce Petrin
method: Email or Phone # 250-747-3520 / port-a-fire@telus.net
Timestamp: 5/13/2008 7:31:42 AM
ID: 58
desc: looking for a set of 44 inch cuts prefer boggers but will look at anything
price: Price
contact: chris
method: REBELRACER_72@hotmail.com
Timestamp: 5/12/2008 9:00:06 PM
ID: 57
desc: Description chev 305 long block, roller cam, rebuilt, needs finishing 300.00 corp 10 bolt front 4:10 gears great condition...offers...604 530 8536..john...trades welcome
price: Price
contact: john
method: Email or Phone #
Timestamp: 4/21/2008 11:56:46 AM
ID: 56
desc: Screamin' Demon Race Truck 410+411 gear ratio. 21/12 chain drive. ratchet shifter. 350 chev. engine - rollerized. 202 corvette heads. 4-bolt main. cam set-up for nitros. 300 HP nitros plate with bottle. new motor only 35 minutes run. nicely broke in with 35 inch tire cut for racing. EMAIL - lbugera@telus.net
price: $6000.00 o.b.o.
contact: Dan or Lindell Smith
method: Phone # - 250-672-2035
Timestamp: 4/21/2008 11:53:39 AM
ID: 55
desc: Screamin' Demon Race Truck 410+411 gear ratio. 21/12 chain drive. ratchet shifter. 350 chev. engine - rollerized. 202 corvette heads. 4-bolt main. cam set-up for nitros. 300 HP nitros plate with bottle. new motor only 35 minutes run. nicely broke in with 35 inch tire cut for racing.
price: Price$600.00 o.b.o.
contact: Contact NameDan or Lindell Smith
method: Email or Phone #lbugera@telus.net
Timestamp: 4/15/2008 10:17:21 PM
ID: 54
desc: Description bbc top end includes: 18 degree heads c/w competition porting, titanium valves, valve springs, retainers, keepers, jesel rockers, fabricated valve covers, hogan sheet metal tunnel ram, dual dominators c/w linkage and fuel lines, push rods for 9.800 deck, roller lifters, choice of camshaft and jesel belt drive. contact mon-fri 9:00-5:00
price: $7850
contact: Contact Name Ron
method: Email or Phone # 604-534-0133
Timestamp: 4/13/2008 4:13:18 PM
ID: 53
desc: Solid, balanced blueprinted, 360 ci jeep. bored 040, scheider stump puller cam, ready to run, in beat up body, restored and retrashed 79 cherokee body, with dana 44 true trac rear diff, all driveline u joints new, new custom driveshaft, all new transmission and transfer case bearings,always been on propane, ready for any holly four barrel fuel system, engine in clean, not an oil seep, comes with complete jeep. ready to go less fuel system and tires ( Well comes with baldies for rolling purposes). Just add fuel cell. If you jeep person, or have something that needs an engine, get this package.
price: 2500.00
contact: Dean Koponen
method: Koponen@shaw.ca
Timestamp: 4/9/2008 6:11:09 PM
ID: 52
desc: Descriptionbronco looks some what race ready 3pr tires 302 cage seat harnes fuel cell b&m shifter port alberni
price: Price best offer
contact: Contact Name grant
method: Email or Phone # hollyc@shaw.ca 1250 724 5842
Timestamp: 4/6/2008 3:36:43 PM
ID: 51
desc: Description GOT MUD is for sale. it's an 83 toyota with a 327 small block on 35's with a flatdeck on the back, it's got hy-steer, fully rebuild front and rear diffs with 411 gears and welded rearend, 3" exhaust with flowmasters,the suspension has been upgraded to be softer with 56" rear springs and shackles. B&M slap shifter. i've been racing it for 3 or 4 years now, but screwd up my back so i can't race anymore. it's a great truck for any one of you that are into the scene still and are looking for a new race truck. it's got alot of potential and i'm flexable on the price so if any of you know of someone thats looking for something like this, if you could spread the word i would really appreciate, i'm buying a house so i really need the truck gone. thanks, Duane
price: Price $4000. obo.
contact: Contact Name Duane
method: Email or Phone # (604)-309-6337
Timestamp: 3/14/2008 1:46:35 AM
ID: 50
desc: Description 562 cubic inch arias . chevy bolt pattern . complete from hat to pan , ignitions and fuel system available . rodeck block , arias heads , new crank , rods , pistons , valves , cam lifters , hampton 14/71 helix retro , psi bigmouth hat , new enderle fuel system . fresh mag from zig and have a spare mag fresh also .new rcd crank support and degree wheel . this engine hasnt been fired !!!! have everything to drop in and turn key . 25.k (obo) resonable offers entertained . Also tonns of KB hemi parts just call for what you need
price: Price
contact: Contact Name dave
method: Email or Phone # 604 309 8074
Timestamp: 2/28/2008 5:01:02 PM
ID: 49
desc: Description: looking to purchase chain drive for a pro mud car.
price: Price
contact: Contact Name: Victor
method: Email or Phone #: amv@uwyo.edu or 307-761-0038
Timestamp: 2/7/2008 12:38:29 PM
ID: 48
desc: Description two , new 38.5 ground hawg cut tires / straight across cut ,hook like paddles.40 hours to cut each tire.very nice.$200.00 each. two aluminum rims ,alumistar 15/15 ,5on5 bolt pattern ,like new.$200.00 each.two aluminum,alumistar 15/14 5on4 1/2 bolt pattern. like new.$150.00 each.willing to trade for drum of alcohol,or blown alcohol parts etc...
price: Price etc
contact: Contact Name BILL WELSH
method: Email or Phone # nowornever@shaw.ca 1-250-724-6090
Timestamp: 1/18/2008 10:49:03 AM
ID: 47
desc: "IN A HEARTBEAT" HONDA CIVIC. 1979 honda narrowed honda civic body, on 75 CJ5 jeep chassis. 33" cut superswampers on stock jeep rims. race proven 4 link suspension, turbo 400 trans, dana 44 front and rear housings, T15 transfercase, still have original 3 speed tranny too! I just want to see it race again! Open to offers, great starter race vehicle, drop in an engine & its race ready!!! you can see pics on this website.
price: Price $2700.00 OBO
contact: Contact : Rich Crouch
method: Phone # 604 855-9783
Timestamp: 1/8/2008 4:51:08 PM
ID: 46
desc: Description BOONDOGGLE 1932 Chev coupe 481 with 871 littlefield blower SCS gearbox with Crower clutches. This car is completely rebuilt from front to rear . Almost everything on this unit is new. Only 7 passes on new engine and tranny , the blower is also fresh. To much to list .
price: Price $ 23,000.00
contact: Contact Name Curt Morben
method: Email or Phone # 250-267-2240
Timestamp: 12/27/2007 12:51:17 AM
ID: 45
desc: Description holley annilator distributor for sbc
price: Price 100
contact: Contact Name Norm
method: Email or Phone #604 209 6775
Timestamp: 12/27/2007 12:49:06 AM
ID: 44
desc: Description 600 ededlbrock carb with calibration kit
price: Price190
contact: Contact Name Norm
method: Email or Phone #604 209 6775
Timestamp: 12/27/2007 12:47:24 AM
ID: 43
desc: Descriptionbare small block chevy
price: Price300
contact: Contact Namenorm
method: Email or Phone #604 209 6775
Timestamp: 12/27/2007 12:45:52 AM
ID: 42
desc: Description800 eps ededlbrock carb with offroad needles and seats,comes with csalibration kit
price: Price250
contact: Contact Namenorm
method: Email or Phone #604 209 6775
Timestamp: 12/16/2007 2:10:55 PM
ID: 41
desc: Descriptionlooking for fiberglass bodyparts for 88-98 chevy truck
price: Price
contact: Contact NameGARY
method: Email or Phone #ACANNON4@EC.RR.COM OR 2523937357
Timestamp: 10/27/2007 10:42:51 AM
ID: 40
desc: Description
price: Price
contact: Contact Name
method: Email or Phone #
Timestamp: 10/24/2007 10:35:12 PM
ID: 39
desc: Descriptionlencoreveser trans with blanket 1600.00
price: Price1600.00
contact: Contact Namecliff
method: Email or Phone #1250 7244975
Timestamp: 10/24/2007 10:33:11 PM
ID: 38
desc: Descriptionlenco reveser trans with blanket f n r
price: Price1600.00
contact: Contact Namecliff
method: Email or Phone #1250 7244975
Timestamp: 10/22/2007 11:01:57 PM
ID: 37
desc: Description1999 33 ft. 5th wheel enclosed car hauler 12000 lb gvw. 18,' for car ,13' living area,shower, vanity ,microwave,4, single beds,33,gals water tank winchs for car and rear door 110 -12 volt lights 18' awning,electric jacks, rearjacks,rollers no inside wheel wells.
price: Price15,000 obo.
contact: Contact Namecliff
method: Email or Phone #250 720 7290
Timestamp: 10/22/2007 10:44:20 PM
ID: 36
desc: Description1985ford 1 ton duallybox in good cond. with canopy 750 obo. chevy dana 60 frontend, dana 44 topdrive frontend, dana 60 rear also, race parts,bussardhat new,1500,obo,mallory mags4.5 with 6'' offsets,transfromer,coil,wires,cap-2complete units.6'' pump extention, oliver 4 bolt main caps for bbc, call for prices
price: Price
contact: Contact Namecliff
method: Email or Phone #2507207290
Timestamp: 10/22/2007 10:11:10 PM
ID: 35
desc: Description1994 chevy s10 350 v8 turbo350 trans very solid pu shortbox rasberry color
price: Price3500 obo
contact: Contact Namecliff
method: Email or Phone #250 7207290
Timestamp: 10/22/2007 10:04:34 PM
ID: 34
desc: 1979 international toterhome.dt 466eng.5speed with a2speed rear end 3.91 ratio air bag suppention with 5th wheel or conventional hitch.shower vanity microwave fridge bed lots of storage 6500 watt powerplant 60gals freshwater observation deck.air condion.
price: Price34,550
contact: Contact Namecliff
method: Email or Phone #250 720 7290
Timestamp: 10/10/2007 8:17:53 PM
ID: 33
desc: Description ShortStroke Is For Sale <B>PRO MUD RAIL</B> BODY: 1923 MODLE "T" ALL METAL, CUSTOM VINYL TOP & WINDSHIELD FRAME: CHROMEMOLEY TUBE FRAME SUSPENSION: 3 LINK COIL OVER FRONT, 4 LINK COIL OVER REAR FRONT TIRES: 33" SAND PADDLE w/ MRT CARBON FIBER RIMS. REAR TIRES: 35" SUPPER SCOOP w/ ALUMINUM WIDE 5 RIMS <B>DRIVETRAIN</B> FRONT: TOYOTA W/ OPEN 4.11 GEARS REAR: FORD 9" STRANGE THIRD MEMBER W/ SPOOLED 4.56 GEARS AND MOSIER AXELS TRANSMISSION: SCS 2 SPEED WITH REVERSER CLUTCH: 11" CROWER TRIPLE DISK CLUTCH DRIVELINE: CHAIN DRIVE <B>ENGINE</B> FRESH OVERHAUL ON MOTOR END OF LAST SEASON BLOCK: 572 CI. DART BIG M, SPORTSMAN 4.5" BOAR, 4.5" STROKE. CRANK: 340 INTERNAL BALLANCE, CROSS DRILLED RODS: 6.535 EAGLE ESP,ARP BOLTS PISTONS: WISE CO 13.5 :1 W/SEEMLESS TOP RINGS & CLEVITE H BEARRINGS CAM: FULL ROLLER COMP BILLET, DUR. .288 .320 LIFT.867 .816 LOBE SEP. 118 HEADS: DART 345CC IRON EAGLE W/ 2.30INT. 1.88 EX. COMP ROLLER SPRINGS ,FLOWED 404@ 28IN. WATER, PRO MAGNAM FULL ROLLER LIFTERS, COMP VERT.BAR ROLLER LIFTERS. CHROMEMOLEY PUSH RODS. INTAKE: 1471 LITTLE FILD SUPER CHARGER W/ BIRD CATCHER INJECTION, K&N AIR FILTER IGNITION:PRO MAG 12, SPARE MSD COIL, DUNN OFFSET DRIVE <B>SPARE PARTS</B> TWO TRU TRACK LOCKERS AND SPARE AXLES FOR TOYOTA FRONT DIFF DANA 30 FRONT DIFF WITH TRU TRACK LOCKER AND SPARE AXLES FRONT SUPERSWAMPER TSL 33" CUTS TWO 15” X 15” ALUMINUM DOUBLE BEAD LOCKS RIMS CROWER 11” TWIN DISK CLUTCH – NEEDS WORK TWO EXTRA GEARS FOR FORD 9” PRO GEAR SETS, 4.88 AND 4.11 BRAND NEW 4.11 GEAR SET FOR TOYOTA FRONT DIFF 1250 DOMINATOR FLOWED TO 1350 CFM 4 SPARE GEAR SET FOR SES TRANSMISSION 1 SET – WIDE 5 X 6 ADAPTER 12 NEW COMP LIFTERS ROLER 6 NEW MAINLEY EX VALVES 3 NEW LONG COMP PUSH RODS 3/8 9.850 13 SHORTS COMP 3/8 X STD PUSH RODS ONE 4” IDLER BLOWER 6 SPARE BLOWER BELTS ONE USED BLOWER PULLY 32 BY 14MM AND MORE – 12 YEARS OF SPARE PARTS <B>TRAILER</B> 48' TOTAL LENGTH, 8' INSIDE HIGHT, 102” WIDE BRACES INSIDE FOR LIFTING MOTOR OR OTHER HEAVY ITEMS WORK BENCH & CABINETS 90 PERCENT ON TIRES FULL CANAPY 12' WIDE PULLS VERY WELL AT ANY LEGAL SPEED TRAILER IN GOOD CONDITION 18' LIVING QUARTERS, ROOF AC, STOVE, OVEN, MICROWAVE, FRIDGE (NEEDS REPAIRE), TWIN BEDS, HOT WATER HEATER, EXTRA LARDGE SHOWER <B>MISC</B> WEBSITE INCLUDED WWW.SHORTSTROKE.NET (CONTRACTED)
price: Price $48000
contact: Contact Name Paulie
method: Email or Phone #406-882-4403
Timestamp: 10/10/2007 8:15:01 PM
ID: 32
desc: Description <B>PRO MUD CAR</B> BODY: 1923 MODLE "T" ALL METAL, CUSTOM VINYL TOP & WINDSHIELD FRAME: CHROMEMOLEY TUBE FRAME SUSPENSION: 3 LINK COIL OVER FRONT, 4 LINK COIL OVER REAR FRONT TIRES: 33" SAND PADDLE w/ MRT CARBON FIBER RIMS. REAR TIRES: 35" SUPPER SCOOP w/ ALUMINUM WIDE 5 RIMS <B>DRIVETRAIN</B> FRONT: TOYOTA W/ OPEN 4.11 GEARS REAR: FORD 9" STRANGE THIRD MEMBER W/ SPOOLED 4.56 GEARS AND MOSIER AXELS TRANSMISSION: SCS 2 SPEED WITH REVERSER CLUTCH: 11" CROWER TRIPLE DISK CLUTCH DRIVELINE: CHAIN DRIVE <B>ENGINE</B> FRESH OVERHAUL ON MOTOR END OF LAST SEASON BLOCK: 572 CI. DART BIG M, SPORTSMAN 4.5" BOAR, 4.5" STROKE. CRANK: 340 INTERNAL BALLANCE, CROSS DRILLED RODS: 6.535 EAGLE ESP,ARP BOLTS PISTONS: WISE CO 13.5 :1 W/SEEMLESS TOP RINGS & CLEVITE H BEARRINGS CAM: FULL ROLLER COMP BILLET, DUR. .288 .320 LIFT.867 .816 LOBE SEP. 118 HEADS: DART 345CC IRON EAGLE W/ 2.30INT. 1.88 EX. COMP ROLLER SPRINGS ,FLOWED 404@ 28IN. WATER, PRO MAGNAM FULL ROLLER LIFTERS, COMP VERT.BAR ROLLER LIFTERS. CHROMEMOLEY PUSH RODS. INTAKE: 1471 LITTLE FILD SUPER CHARGER W/ BIRD CATCHER INJECTION, K&N AIR FILTER IGNITION:PRO MAG 12, SPARE MSD COIL, DUNN OFFSET DRIVE <B>SPARE PARTS</B> TWO TRU TRACK LOCKERS AND SPARE AXLES FOR TOYOTA FRONT DIFF DANA 30 FRONT DIFF WITH TRU TRACK LOCKER AND SPARE AXLES FRONT SUPERSWAMPER TSL 33" CUTS TWO 15” X 15” ALUMINUM DOUBLE BEAD LOCKS RIMS CROWER 11” TWIN DISK CLUTCH – NEEDS WORK TWO EXTRA GEARS FOR FORD 9” PRO GEAR SETS, 4.88 AND 4.11 BRAND NEW 4.11 GEAR SET FOR TOYOTA FRONT DIFF 1250 DOMINATOR FLOWED TO 1350 CFM 4 SPARE GEAR SET FOR SES TRANSMISSION 1 SET – WIDE 5 X 6 ADAPTER 12 NEW COMP LIFTERS ROLER 6 NEW MAINLEY EX VALVES 3 NEW LONG COMP PUSH RODS 3/8 9.850 13 SHORTS COMP 3/8 X STD PUSH RODS ONE 4” IDLER BLOWER 6 SPARE BLOWER BELTS ONE USED BLOWER PULLY 32 BY 14MM AND MORE – 12 YEARS OF SPARE PARTS <B>TRAILER</B> 48' TOTAL LENGTH, 8' INSIDE HIGHT, 102” WIDE BRACES INSIDE FOR LIFTING MOTOR OR OTHER HEAVY ITEMS WORK BENCH & CABINETS 90 PERCENT ON TIRES FULL CANAPY 12' WIDE PULLS VERY WELL AT ANY LEGAL SPEED TRAILER IN GOOD CONDITION 18' LIVING QUARTERS, ROOF AC, STOVE, OVEN, MICROWAVE, FRIDGE (NEEDS REPAIRE), TWIN BEDS, HOT WATER HEATER, EXTRA LARDGE SHOWER <B>MISC</B> WEBSITE INCLUDED WWW.SHORTSTROKE.NET (CONTRACTED)
price: Price $48000
contact: Contact Name Paulie
method: Email or Phone #406-882-4403
Timestamp: 10/7/2007 9:02:34 AM
ID: 31
desc: Description needed! set of front bogger swampers or cuts-36 inch also enderle bird hat complete set up for alky and enderle pump
price: Price???
contact: Contact Name Ryan
method: Email or Phone # shocker_mudracing@hotmail.com
Timestamp: 9/28/2007 11:02:46 PM
ID: 30
desc: Descriptiorn i got some race stuf U name ican find it
price: Price cheep
contact: Contact Nameclay lea_davidson@bcit.com
method: Email or Phone #60491`00244
Timestamp: 9/12/2007 12:11:48 PM
ID: 29
desc: NOS Pro Fogger nitrous system. 2 sets of nozzles, 1 NOS 1 Edelbrock E2. 4 bottles, 2 full, 2 with about 8 lbs. NOS Purge system, complete. NOS bottle warmer. Jets from 250 to 500. This is a serious power adder system not for the weak of heart. Complete system ready to install.
price: $1000.00
contact: Bill
method: bldracing@telus.net 604-853-3335
Timestamp: 9/3/2007 7:35:54 PM
ID: 28
desc: Description 77 chev 4x4 long box,ex mud /sand racer ,competition engineering 4link,538 pro gears,competition engineering shocks,fuel cell,powerglide shifter,harness,dana 60 rear,44 front,tilt front clip,205 tranfer case,aluminum dash,4 paddle tires,4 terras on rims.
price: Price 6.000 obo
contact: Contact Name logan
method: Email or Phone # 250 731 6479
Timestamp: 9/3/2007 7:20:31 PM
ID: 27
desc: 88 ranger, pro mud racer ,rolling chassis,bb chev motor plates,mitchell wheels,narrowed 9inch truss,ladder bars front and rear.spool and axles,powerlock 44 in front,tube chassis,complete fiberglass body,full tube cage,black lexan windows,painless wiring,chain drive,6 inch cowl hood,1450 paddles front w/bead locks,bigger diggers rear,koni shocks ,fuel tank,4core,headers,seat,and belts,blackw/ orange chassis,4spare paddles on rims,and more,ex blown alky,ran mud circuit as rude awakening,2/3 sec ride.
price: Price8.000 obo
contact: Contact Name ray
method: Email or Phone #250 720 1736
Timestamp: 8/27/2007 7:27:41 PM
ID: 26
desc: 3 different ford axles - dana 44 hp housing with 355 gears from 76 f150 $100 obo - ford 9 " with 355 gears from 76 f150 $200 obo - ford 9 " from early bronco (gears ?) $200 obo
price:
contact: chris
method: 778-840-0908
Timestamp: 8/27/2007 7:22:12 PM
ID: 25
desc: corp 14 bolt narrowed to 61 inches. detroit locker, 410 gears,new bearings,disc brakes. was in 4 linked jeep.
price: 850 obo
contact: chris
method: 778-940-0908
Timestamp: 7/18/2007 3:56:55 PM
ID: 24
desc: Description 1977 fj 45 toyota mud racer,set up for bbc or sbc,turbo 400 trans and dana 20 t-case, 33 inch cut boggers on the rear, 33 inch cut swampers on front, dana 44 front diff with afcoil coil overs in rear, ford 9 inch with spool in rear, full cage to nwmra regs., one piece fiberglass front end, 144 inch wheel base, msd 7a box. All you need to do is drop in a engine to go racing or will sell with 396 bbc on nitrous that is in it. I have pictures (just not digital) if you want to see it. It is cluttering up the garage and I need to get rid of it. It is a perfect starter mud racer and I am open to offers. I would like to see it run again, I just don't have the time anymore.
price: Price 2500.00 o.b.o without engine
contact: Contact Name Blake Crock
method: Email or Phone # crockb@telus.net or 604-250-1752
Timestamp: 7/8/2007 7:10:54 PM
ID: 23
desc: Description
price: Price
contact: Contact Name
method: Email or Phone #
Timestamp: 7/8/2007 7:10:16 PM
ID: 22
desc: Description complete big shot nitros system $600.00 .square tube frame,14point roll cage chain drive,rear ends,narrowed 35 chev sedan body included,formerly the original back in black chassis$1000.o.b.o .holley 850 double pumper,$250.o.b.o .team g intake,port matched$200.o.b.o .1100 dominater,ran only six passes $900.oo .holly black fuel pump$275. holly blue pump 65.00 .berry grant fuel by pass,regulater,holly regulater,with gauges,$175.00 for all,spare nos solenoid never used $100.00 ported oval port big chevy heads erson roller rockers included$1000.oo o.b.o ,spare big shot nitros plate and jets 150.00$ m.s.d dist,msd,6al brain box,msd,coil fits big chevy 850.00$ for all
price: Price
contact: Contact Name Dave @ back in black racing
method: Email or Phone #(250)672 9662 or 250 852 0590 cell
Timestamp: 7/4/2007 9:07:34 PM
ID: 21
desc: "logger" box for short box w/led taillights $300 obo
price: Price
contact: Contact Name darren
method: Email dphelan@shawcable.com
Timestamp: 7/4/2007 9:05:53 PM
ID: 20
desc: 1979 F250 PARTS DANA44 410 GEARS HUB TO HUB, DANA 60POSI DRUM TO DRUM $300EA OBO. C6 AUTO $300OBO LOTS OF OTHER MISC PARTS DOORS FENDERS CALL ME
price: Price
contact: Contact NameDARREN
method: Email dphelan@shawcable.com
Timestamp: 7/1/2007 6:16:48 PM
ID: 19
desc: Descriptiontube chasis mud racer, roller or turn key, 528 ci ford 750-800 hp +500 fogger system, way to much to list here, low 3s in 200 foot pit . check it out at cmro .net its called hog wild. motor +trany are fresh . 6000 for chasis or 16000 for turn key and go racing.
price: Price
contact: Contact Name wayne seaward
method: Email or Phone #403-793-4629
Timestamp: 6/25/2007 6:46:58 PM
ID: 18
desc: 81 GMC shortbox 4x4 dana 60 front and rear, 410 gears, fairly new 350, roughly 350 hp, 12" lift, 8000 lb winch, 38" swampers, 205 transfer case, 4 spd
price: $6500
contact: Rick Harks
method: tdp731@hotmail.com or 579-9945/314-7540
Timestamp: 6/21/2007 7:02:11 PM
ID: 17
desc: 1952 Ford truck,4 link, rear engine,chain drive set up for BB Ford easy adapt to any power, 40's or 44's meets NWMRA tech.Dana 60's front & rear,fast & reliable. no motor or trans.photos available
price: Price$3500.00 obo
contact: Contact Name Norm Robertson
method: Email or Phone #604 885 0817
Timestamp: 6/6/2007 8:39:03 PM
ID: 16
desc: Description 71 toyota land cruiser fj-40 engine 305 tune port fuel injected fender wheel headers transmission s m 435 transfercase 205 twin stick suspension 1/4 eleptic 4link rear coil 4 link front uni-mog 404 portal akles 756 gear ratio warn wintch custom fenders full roll cage tci seats tyde to cage this a trail rig 44 inch boggers has hardtop and doors would consider trade for nice mud bog racer
price: Price 7.000
contact: Contact Name rod peters
method: Email or Phone # 509-391-0041
Timestamp: 6/5/2007 2:49:55 PM
ID: 15
desc: -KB hemi stuff -push rods -conecting rods -stagge 6 water block needs minnor repair -brad 98 10 bolt fuel head work great with alky ive run them 5.9 sec @ 211 mph on water with lots left . -2 crower black fuel pumps around 13 /14 gal per minute -psi low profile injector hat make an adaptor and run it on a roots blower i did it they works great -mallory mags 4 cry rotation have one run on them since tuneup at donnzigg -hemi dual mag offset -hemi geardrive needs cam gear might have one somewhere . -complete hemis hat to pan or manifold to pan -couple of corp10 bolt housings -700 r4 core -let me know what you need imsure i have more stuff around that i havent looked at in a while
price: call for prices
contact: dave
method: 604-309-8074
Timestamp: 6/4/2007 7:43:13 PM
ID: 14
desc: warn premium hubs 2 sets dana 44/ dana 60
price: 150 ea
contact: chris
method: 778-840-0908
Timestamp: 6/4/2007 7:41:01 PM
ID: 13
desc: dana 60 4.10 gears and carrier (low pinion)
price: 100 obo
contact: chris
method: 778-840-0908
Timestamp: 6/4/2007 7:39:43 PM
ID: 12
desc: dana 44 housing and gears. 76 f150 (high pinion )
price: 200 obo
contact: chris
method: 778-840-0908
Timestamp: 6/4/2007 7:36:07 PM
ID: 11
desc: narrowed 1 ton axle. gm corp 14 61 inches wide. detroit locker,4.10 gears. disc brake brackets. new bearings and seals. has 4 link brackets.
price: 1200 obo
contact: chris
method: 778-840-0908
Timestamp: 6/2/2007 10:28:14 PM
ID: 10
desc: Description I am looking for a set of 15" by 33" super scoopers. If anyone has a used set they would like to get rid of please let me know please.
price: Price ?
contact: Contact NameRyan McCann
method: Email or Phone #ryanmccann69@hotmail.com or 1-250-754-2476
Timestamp: 5/29/2007 9:15:26 PM
ID: 9
desc: 1981 chevy regular cab short box with 10" suspension lift and 3"body lift with 39.5" boggers. 3/4 ton running gear complete with detroit locker in the rear. 383 stroker with about 375hp. all the undercarriage is painted and body is all new with brand new paint.Everything in this truck is new or rebuilt about 600 miles ago. custom gauges,cd player,sunroof also a chrome rollbar that i have never put in. LOTS invested!!! email me for photos if interested
price: 16000.00
contact: Kyle
method: mousetrap528@hotmail.com or 604-991-1902
Timestamp: 5/27/2007 9:29:50 PM
ID: 8
desc: Description 95 dodge ram reg cab short box new evrything dana 60 hp front ott high steer 513 gears leaf spring swap in front eaton rear diff disc brakes 513 gears detroit locker 44inch ss boggers
price: Price15000
contact: Contact Name Matt
method: Email or Phone #m_zerr69@hotmail.com 6045805381
Timestamp: 5/26/2007 10:31:15 AM
ID: 7
desc: desc - 1986 Chevy, long box, regular cab, propane-can be converted to gas, rebuilt engine and transmission and rear end, have all receipts, 4x4, 35" tires, 15 inch aluminum rims, 1 1/2" body lift, 6" suspension, dual flowmaster exhaust, white
price: $6500 obo
contact: Jeff
method: 604-850-7789
Timestamp: 5/18/2007 9:01:05 PM
ID: 6
desc: 1962 Chev (Balistic) rolling chassis Dana 60 front 14 bolt colt rear rockwell gear drive transfer case, tractor class, set up for small block chevy and powerglide.
price: 2500 obo
contact: Andy
method: 250-396-7306
Timestamp: 5/1/2007 10:47:21 PM
ID: 5
desc: Description WANTED 429-460 FORD Blower manifold.Prefer Burst Panel type, but will consider others.
price: Price $450 ?
contact: Contact Name Bruce
method: Email or Phone # bruce56kit@hotmail.com
Timestamp: 4/25/2007 3:27:13 PM
ID: 4
desc: FOR SALE: In a Heartbeat Honda, Rolling chassis. 75 CJ5 JEEP FRAME C/W DANA 44 FRONT AND REAR DIFFS, FOUR LINK FRONT & REAR SUSPENSION, TURBO 400 TRANS & T15 TRANSFERCASE. BODY IS A MODIFIED 78 HONDA CIVIC. 33" SUPER SWAMPER BOGGERS CUT FOR RACING & MOUNTED ON STOCK JEEP RIMS. CALL FOR MORE DETAILS ENGINE NOT INCLUDED
price: Price $4500
contact: Contact Name Richard Crouch
method: Email or Phone # inaheart.beat@shaw.ca
Timestamp: 4/24/2007 8:38:43 PM
ID: 3
desc: Littlefield 14-71 standard helix blower with birdcatcher hat complete with hat nozzles good condition
price: Price 2500.00
contact: Contact Name kyle
method: Email or Phone #604-991-1902 or 604-858-2524
Timestamp: 4/10/2007 9:50:56 PM
ID: 2
desc: do they make gear drives for the late model bbc with hydraulic roller cams, 454 crate engines, probably with step nose hydraulic roller cams?
price: Price
contact: tony
method: tonymistr5@aol.com